Glass balustrade

Self-supporting glass railings are essential elements of modern design in architecture. The self-supporting glazed railing systems become permanent architectural features that maximize the perception of a building by admitting natural light and allowing visual contact with the surroundings. glass railings mean freedom to design.

The self-supporting glazed railing systems improve the comfort of living and add value to buildings.

Full-glass railings are deployed as bands of glass without interfering partitions; they also serve as structural components by their capacity to support high loads. This solution keeps the glazing mounts nearly invisible when finished.

Self-supporting glass railings can be applied in a wide variety of architectural design solutions that are fully tailored to the individual styling preferences of building project owners and designers.

 

 

The full-glass railing system by Domizz is a traditional self-supporting railing system comprising a linear base mount of the railing glazing pane, made of a structural aluminium profile, the glazing pane, which serves as a structural support member that provides a uniform distribution of the wind loads, and a linear loading rail along the top of the glazing pane.


Self-supporting glass railing handrails

We carry A2 type (indoor) and A4 (outdoor) stainless steel handrails made of oval and square hollow sections. The stainless steel handrails are finished in the natural colour; we can optionally provide a powder coat finish in any RAL colour or a DEKORAL wood effect pattern. Stainless steel handrails exhibit superior rigidity and high impact resistance, the performance characteristics which favour safe setting / removal the handrail on / from glazing panes.

 

 


Domizz glazed railing system profiles

The profiles can be installed either directly on the balcony slab / deck top or front edge. The system features an easy and quick to use “dry glass pane chock system”: when a glazing pane is set in the base mount profile, dedicated chocks are installed to stabilize the pane in the upright position. This method greatly reduces the assembly time and keeps the installation clean and neat. The glazing panes require no extra openings for fasteners, which improves the glass strength, slashes the glass pricing, and reduces the fabrication and installation lead times. Solid glazing panes are also easier to replace without dismantling the entire railing structure.


Domizz Self-supporting railing glass

The glazing panes installed in the Domizz self-supporting glazed railings are made of laminated tempered glass. Unlike regular glass, laminated tempered glass is very strong and if broken, the pane is fractured into a mesh of fine and blunt-edged shards that are hard to be injured with, while the laminating film keep the shards in place. The Domizz base mount profile with a system of dedicated EPDM seals and pane chocks helps to install the following panes which come as standard accessories for our systems:

– 8.8.4 laminated glass (two tempered glass panes, each 8 mm thick and bonded together, and four layers of PVB film; overall pane thickness: 17.52 mm)

The railing panes does not have to be clear. The laminating film between the glass panes can be tinted, patterned, or finished with high-quality digital print. Other glass pane finish options include anti-reflective or low-emission coats.

The project designer should choose the glazing pane type, size and strength performance according to building laws, actual loads, and the support component performance of the self-supporting full-glass railing system.

 

TOP PROMO

 

       Description

» Minimal balustrade system

» State of the art design

» View Crystal 1,0 kN/m

» View Crystal Plus 3,0 kN/m

Technical data

» Possibilities

Assembly above slab
Assembly above slab flush
Assembly in front of the slab:
     -Flush with the slab
     -Flush with the pavement

     Maximum height

1.100 mm

    Gazing

This balustrade system enables 12 glazing possibilities: double glass of 10, 8 or 6 mm joined by up to 4 polyvinyl butyrals of 0.38 mm. The use of tempered glass is suggested
   TYPE LAMINATED COMPOSITIONS
6- 1.52 -6
6- 1.14 -6
6- 0.76 -6
6- 0.38 -6
8- 1.52 -8
8- 1.14 -8
8- 0.76 -8
8- 0.38 -8
10- 1.52 -10
10- 1.14 -10
10- 0.76 -10
10- 0.38 -10
Test centre

Tests according to UNE 85237:1991, UNE 85.238:1991 and UNE 85240:1990 regulations, requirements established in Eurocode 1 according to EN 1991-1-1:2003 /AC: 2010

1 – Static horizontal test towards the exterior.

2 – Static horizontal test towards the interior.

3 – Dynamic test with mild object.

4 – Dynamic test with hard object.

5 – Verification of the specifications of the Eurocode according to the table 6.12 for categories of use of 3kN/m.

CLASSIFICATION ACCORDING TO UNE 85240:1990:

Class A-EXCELLENT

Reference test on the balustrading with extruded aluminum and glass, with top free edge bar at total height 1100mm. (H) x 1500mm. (L)

Reference test on the balustrading with extruded aluminum and glass, at total height 1100mm. (H) x 1500mm. (L)